Not Recommended for New Design

SCM1241M

Package Image

Package:DIP33

3D CAD Data

SCM1241M incorporates 600V10A IGBT, FRDs for the 3-phase bridge, pre-drive ICs with protection functions such as UVLO (undervoltage lock out), OCP (over current protection), TSD (thermal shutdown), etc., and bootstrap diodes with limiting resistors into 1 package. Features full mold package with insulation breakdown voltage of 1/2000V, and supports 3 shunt method enabling current detection in each phase.

Design Support

See More

Close

Features

    ・Built-in boot diodes with limiting resistors (22Ω)
    ・Built-in overcurrent protection (OCP) in each phase
    ・High-side IGBT can be shutdown while overcurrent protection operates
    ・Built-in shoot through prevention (STP) circuit (when the ON signal is input simultaneously)
    ・Possible to shut down by an external signal
    ・Built-in thermal shutdown (TSD) circuit
    ・Supports CMOS(3.3V, 5V) input levels

Application

    ・Drivers for Refrigerator, air conditioner compressors  
    ・Washing machine drums 
    ・Fan motors, pumps

Specifications

Type Power IC
Breakdown Voltage 600 V
Output Current 10.0 A
RDS(ON) max./
VCE(SAT) typ.
1.70V
Output Element IGBT
Input Threshold 3.3/5.0 V
UVLO YES
Overcurrent (OCP or OCL) OCP
Temperature Detection Thermal Shutdown
Fault Signal Output YES
3 Shunt Support YES
Bootstrap Diode
Simultaneous On-state Protection YES
Reg Output NO
Package Weight (Typ.) g

Typical Application

Typical Application

Pin Configuration Definitions

Pin Configuration Definitions

Physical Dimensions

Physical Dimensions

Questions or Comments?

Please feel free to contact us if you cannot find the desired product from the lineup.