ACTIVE

SCM1263MF

The SCM1200MF series are high voltage 3-phase motor drivers in which transistors, pre-drive circuits, and bootstrap circuits (diodes and resistors) are highly integrated.
These products can run on a 3-shunt current detection system and optimally control the inverter systems of medium-capacity motors that require universal input standards.

Design Support

See More

Close

Features

    ・Each half-bridge circuit consists of a pre-drive circuit
    ・In case of malfunction, all outputs shut down via three FO    pins connected together
    ・Built-in bootstrap diodes with current limiting resistors    (22 Ω)
    ・CMOS compatible input (3.3 to 5 V)
    ・Pb free
    ・Isolation voltage: 2500 V for 1 min,
     UL recognized component (File No.: E118037)
    ・Fault signal output at protection activation
    ・Protections include:
     Undervoltage Lockout for power supply
     -High-side (UVLO_VB): Auto-restart
     -Low-side (UVLO_VCC): Auto-restart
     Overcurrent Protection (OCP): Auto-restart
     Simultaneous On-state Prevention: Auto-restart
     Thermal Shutdown (TSD): Auto-restart

Application

    For motor drives such as:
    ・Refrigerator compressor motor
    ・Air conditioner compressor motor
    ・Washing machine main motor
    ・Fan motor
    ・Pump motor

Specifications

Type Power IC
Breakdown Voltage 600 V
Output Current 15.0 A
RDS(ON) max./
VCE(SAT) typ.
1.70V
Output Element IGBT
Input Threshold 3.3/5.0 V
UVLO YES
Overcurrent (OCP or OCL) OCP
Temperature Detection Thermal Shutdown
Fault Signal Output YES
3 Shunt Support YES
Bootstrap Diode Built-in
Simultaneous On-state Protection YES
Reg Output NO
Package Weight (Typ.) 11.8 g

Typical Application

Typical Application

Block Diagram

Block Diagram

Pin Configuration Definitions

Pin Configuration Definitions

Physical Dimensions

Physical Dimensions

Questions or Comments?

Please feel free to contact us if you cannot find the desired product from the lineup.