OBSOLETE
SLA6845MZ
The SLA6845MZ provides a highly-integrated solution by incorporating key components into one package – IGBTs in a 3-phase full-bridge configuration, built-in protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, and pre-driver ICs with 7.5 V regulator output. The SLA6845MZ employs three LS terminals to configure a 3-shunt current detection system. The product is supplied in a SIP package with Al heatsink.
Design Support
Related Documents
Features
-
・CMOS-compatible input (3.3 or 5 V) ・Built-in protection circuit for controlling power supply voltage drop (UVLO) ・Built-in overheat detection circuit (TD) ・Regulator output: 7.5 V, 35 mA ・Small SIP (SLA, 24 pins) ・3-shunt current detection
Application
-
Include motor control for: ・Air conditioner fan ・Air purifier fan ・Washer-dryer fan ・Dishwasher pump
Specifications
Type | Power IC |
---|---|
Breakdown Voltage | 600 V |
Output Current | 3.0 A |
RDS(ON) max./ VCE(SAT) typ. |
1.75V |
Output Element | IGBT |
Input Threshold | 3.3/5.0 V |
UVLO | YES |
Overcurrent (OCP or OCL) | None |
Temperature Detection | Temperature Detection Function |
Fault Signal Output | YES |
3 Shunt Support | YES |
Bootstrap Diode | |
Simultaneous On-state Protection | NO |
Reg Output | YES |
Package Weight (Typ.) | g |
Typical Application
Block Diagram
Pin Configuration Definitions
Physical Dimensions
Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.