Not Recommended for New Design
SMA6853MX
The SMA6853MX provides a highly-integrated solution by incorporating key components into one package – 500V/2.5A MOSFET in a 3-phase full-bridge configuration, built-in protection functions such as UVLO (undervoltage lockout) and TD (thermal detection) circuits, pre-driver ICs with 7.5 V regulator output, and bootstrap diodes with limiting resistors.
The product is capable of detecting overcurrent through three shunt resistors. And the package is fully-molded SIP.
Design Support
Related Documents
Features
-
・Built-in bootstrap diodes with 22Ω limiting resistor
・CMOS-compatible input (3.3 or 5 V)
・Built-in protection circuit for controlling power supply
voltage drop (UVLO)
・Built-in overheat detection circuit (TD)
・Regulator output: 7.5 V, 35 mA
・Overcurrent detection enabled via three shunt resistors
・Small SIP (SMA, 24 pins)
Application
-
Include motor control for:
・Air conditioner fan
・Air purifier fan
・Washer-dryer fan
Specifications
Type | Power IC |
---|---|
Breakdown Voltage | 500 V |
Output Current | 2.5 A |
RDS(ON) max./ VCE(SAT) typ. |
2.4Ω |
Output Element | MOSFET |
Input Threshold | 3.3/5.0 V |
UVLO | YES |
Overcurrent (OCP or OCL) | None |
Temperature Detection | Temperature Detection Function |
Fault Signal Output | YES |
3 Shunt Support | YES |
Bootstrap Diode | Built-in |
Simultaneous On-state Protection | NO |
Reg Output | YES |
Package Weight (Typ.) | g |
Typical Application
Block Diagram
Pin Configuration Definitions
Physical Dimensions
Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.