Not Recommended for New Design
SMA6822MH
SMA6822MH incorporates 250V/2A IGBT, MOSFET for the 3-phase full bridge, UVLO (undervoltage lock out) and TD (thermal detection) protection functions, pre-drive Ics with 7.5V regulator output function, and bootstrap diodes with limiting resistors into 1 package. Available in full mold package.
Design Support
Related Documents
Features
-
・Built-in boot diode with 22Ω limiting resistor
・CMOS compatible input(3.3V to 5.0V)
・Built-in UVLO circuit
・Built-in thermal detection circuit
(non-stopping, Fo output)
・built-in regulator output function (7.5V/35mA)
・SIP package
Application
-
・Fan motors
・Air purifier fan motors
・Dryer fan motors
Specifications
Type | Power IC |
---|---|
Breakdown Voltage | 500 V |
Output Current | 1.5 A |
RDS(ON) max./ VCE(SAT) typ. |
4.0Ω |
Output Element | MOSFET |
Input Threshold | 3.3/5.0 V |
UVLO | YES |
Overcurrent (OCP or OCL) | None |
Temperature Detection | Temperature Detection Function |
Fault Signal Output | YES |
3 Shunt Support | NO |
Bootstrap Diode | Built-in |
Simultaneous On-state Protection | NO |
Reg Output | YES |
Package Weight (Typ.) | g |
Typical Application
Block Diagram
Pin Configuration Definitions
Physical Dimensions
Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.