The SIM6800M/MV series are high voltage 3-phase motor drivers in which transistors, a pre-drive circuit, and bootstrap circuits (diodes and resistors) are highly integrated.
These products can run on a 3-shunt current detection system and optimally control the inverter systems of low- to medium-capacity motors that require universal input standards.

Design Support

Related Documents

■3D CAD Data

See More



    ●Built-in Bootstrap Diodes with Current Limiting Resistors
        (60 Ω)
    ●CMOS-compatible Input (3.3 V or 5 V)
    ●Bare Lead Frame: Pb-free (RoHS compliant)
    ●Isolation Voltage: 1500 V (for 1 min)
       UL-recognized Component (File No.: E118037)
    ●Fault Signal Output at Protection Activation (FO Pin)
    ●High-side Shutdown Signal Input (SD Pin)
    ●Protections Include:
       Overcurrent Limit (OCL): Auto-restart
       Overcurrent Protection (OCP): Auto-restart
       Undervoltage Lockout for Power Supply
       High-side (UVLO_VB): Auto-restart
       Low-side (UVLO_VCC): Auto-restart
       Thermal Shutdown (TSD): Auto-restart


    For motor drives such as:
    ●Refrigerator Compressor Motor
    ●Fan Motor and Pump Motor for Washer and Dryer
    ●Fan Motor for Air Conditioner, Air Purifier, and Electric Fan


Type Power IC
Breakdown Voltage 500.00 V
Output Current 2.0 A
RDS(ON) max./
VCE(SAT) typ.
Output Element MOSFET
Input Threshold (3.3V or 5V) 3.3/5.0
Overcurrent (OCPorOCL) OCP/OCL
Temperature Detection Thermal Shutdown
Fault Signal Output YES
3 Shunt Support YES
Bootstrap Diode Built-in
Simultaneous On-state Protection NO
Reg Output NO

Block Diagram

Block Diagram

Pin Configuration Definitions

Pin Configuration Definitions

Questions or Comments?

Please feel free to contact us if you cannot find the desired product from the lineup.