OBSOLETE
SMA6862MZ
SMA6862MZ incorporates 500V/1.5A IGBT, MOSFET (built-in FRD) for the 3-phase bridge, pre-drive ICs with protection functions such as UVLO (undervoltage lock out), OCP (over current protection), TSD (thermal shutdown), etc., and bootstrap diodes with limiting resistors into 1 package. Full mold package
Design Support
Related Documents
Features
-
・Built-in boot diode with 210Ω limiting resistor
・Built-in overcurrent protection circuit (OCP)
・Overcurrent protection with off-time period adjustable by an external capacitor
・Overcurrent limiting operation
・Built-in thermal shutdown circuit (TSD) ・Externally controllable shutdown operation
・SIP package
Application
-
・Fan motors
・Air purifier fan motors
・Dryer fan motors
Specifications
Type | Power IC |
---|---|
Breakdown Voltage | 500 V |
Output Current | 1.5 A |
RDS(ON) max./ VCE(SAT) typ. |
4.0Ω |
Output Element | MOSFET |
Input Threshold | 5 V |
UVLO | YES |
Overcurrent (OCP or OCL) | OCP |
Temperature Detection | Thermal Shutdown |
Fault Signal Output | YES |
3 Shunt Support | NO |
Bootstrap Diode | |
Simultaneous On-state Protection | NO |
Reg Output | NO |
Package Weight (Typ.) | g |
Typical Application
Block Diagram
Pin Configuration Definitions
Physical Dimensions
Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.