Not Recommended for New Design
SMA6853MZ
3D CAD Data
SMA6853MZ incorporates 500V2.5A IGBT, MOSFET for the 3-phase full bridge, UVLO (undervoltage lock out) and TD (thermal detection) protection functions, pre-drive Ics with 7.5V regulator output function, and bootstrap diodes with limiting resistors into 1 package. Also supports 3 shunt method enabling current detection in each phase. Full mold package.
Design Support
Related Documents
Features
-
Built-in boot diode with 60Ω limiting resistor, CMOS compatible input (3.3V to 5.0V), built-in undervoltage lock out circuit (UVLO), built-in thermal detection circuit (non-stopping, Fo output), built-in regulator output function (7.5V/35mA), overcurrent detection enabled by 3 shunt resistors, SIP package.
Application
-
For driving fan motors, air purifier fan motors, and dryer fan motors
Specifications
| Type | Power IC |
|---|---|
| Breakdown Voltage | 500 V |
| Output Current | 2.5 A |
| RDS(ON) max./ VCE(SAT) typ. |
2.4Ω |
| Output Element | MOSFET |
| Input Threshold | 3.3/5.0 V |
| UVLO | YES |
| Overcurrent (OCP or OCL) | None |
| Temperature Detection | Temperature Detection Function |
| Fault Signal Output | YES |
| 3 Shunt Support | YES |
| Bootstrap Diode | |
| Simultaneous On-state Protection | NO |
| Reg Output | YES |
| Package Weight (Typ.) | g |
Typical Application
Block Diagram
Pin Configuration Definitions
Physical Dimensions
Questions or Comments?
Please feel free to contact us if you cannot find the desired product from the lineup.